Troubleshooting the Netgear Orbi white light issue is not rocket science. But let us be very frank with you, most users are experiencing this issue Now that you are reading this article, we are assuming that you might be facing the same issue. For your information, some of these hacks might also require you to use the Orbi router login username and password.
Right before you walk through the solutions mentioned below, you will need to restart your network device. Worry not, you should turn off your device, wait for more than thirty seconds, and then, switch on your networking device without any further ado. So, did restarting the device help you out? No? Well then, you already know what to do, i.e. read the solutions given below without wasting any more of your precious time.
[Fixed] Netgear Orbi White Light Issue
1. Check the WiFi Connection
The number one reason why you are experiencing the Netgear Orbi white light issue is that the connection between the Netgear Orbi router and the existing modem is weak. This might be because the Ethernet cable connected to your network device is damaged. To resolve it, it is recommended that you replace the existing Ethernet cable with a new one. Once done, check whether you are able to resolve the issue at hand or not.
2. Maintain a Proper Distance
Check the distance between the Netgear Orbi router and the existing modem. We are assuming that it is much more than required. Otherwise, you would not be facing the Netgear Orbi white light issue. Taking this into consideration, you ought to close up the distance separating them and see if this hack works for you. By any chance, if luck still has not kissed your feet, then you already know what to do, i.e. continue reading this post.
3. Remove the Electronic Devices
Electronic devices like cordless phones, washing machines, baby monitors, microwave ovens, refrigerators, and other similar devices emit electromagnetic waves which are not good for the health of your Orbi router as they mess with the signals emitted from them. To prevent them from interrupting the signals of your device further, it is highly suggested that you relocate the electronic devices and keep them far from your Netgear Orbi device.
4. Update the Orbi Firmware
Firmware updates are known to fix issues Orbi purple light issue, the Orbi satellite not syncing to router issue, and much more. Because of this, it is also very much capable of resolving the white light issue. Given this, you should update the firmware of your device to its latest version without wasting too much time. Once that is done, let us hope that the LED light on your Netgear Orbi wireless router has turned green and stopped blinking white.
5. Reset the Netgear Orbi Device
In case not even one of the hacks given above helped you to resolve the Netgear Orbi white light issue, then your last resort is to reset or restore your device to its default factory settings. Once that is done, you may configure your device from the beginning with the aid of the Orbi login username and password. To know more about these admin details, you may refer to the information given in the user manual of your Netgear Orbi WiFi router.
The Bottom Line
This ends the article written on how to troubleshoot the Orbi white light issue. In case you are able to fix it after following the aforementioned solutions, it is good for you. While fixing the issue at hand, if you figured out some other way through which the same can be done, then you may share it with your fellow readers. For the same, it is recommended that you put the comment section to use. It is the perfect platform for what you want to do.
